- Delta chilled water and Plumbing Valves
- Standard Water Atrrester Hammer
- Smoke Eaters
Delta chilled water and Plumbing Valves
STANDARD WATER HAMMER ARRESTORS
"MINI-MAX"™ ANGLE STOP - SINGLE FIXTURE WITH ARRESTOR (CHROME PLATED) "AA"
This innovative arrestor series combines an angle stop required for many plumbing fixture applications with a built-in water hammer arrestor. The unit is designed to control the damaging effects of pressure spikes caused by quick-closing valves within a system. The Loose Key feature replaces the exposed handle provided with other angle stops and provides a degree of vandal resistance in public installations. The Mini-Angle Stop Arrestor/Loose Key Stop is manufactured in a chrome-plated finish that is optimal for an exposed location. The unit label is a friction-applied polymer that can be easily removed following installation for a clean, decorative look. It is furnished with either a 5/8” Compression service alignment and a 3/8” Compression fitting to the fixture. Applications include water closets, dishwashers, ice makers, and lavatories.
Mini-Angle Stop Arrestor - Loose Key
This innovative arrestor series combines an angle stop required for all residential plumbing fixtures with a built-in water hammer arrestor. The unit is designed to control the damaging effects of pressure spikes caused by quick-closing valves within a system. The Mini-Angle Stop Arrestor is manufactured in a chrome-plated finish that is optimal for an exposed location. The units label is a friction applied polymer that can be easily removed following installation for a clean, decorative look. They are furnished in either a 5/8″ Compression or 1/2″ NPT service alignment with a 3/8″ Compression fitting to the fixture. Applications include water closets, dishwashers, ice makers, and lavatories.
SmokeEater units are designed to literally “Eat all Smoke” and remove it from the air through an innovative filtration process. SmokeEater Air Purifiers are recirculating indoor air and adjusting the filtration process according to the demand of smoke contamination. Specially designed carbon filters absorbing a wide range of odors and most VOC’s. Heavy Shisha or light cigarette smoke all will be treated with our SmokeEater units and clean smoke-free air will exit the unit. SmokeEater units are standalone systems that are ready to operate once they are powered up. With intelligent sensors, the unit controls itself and is activated when needed automatically.
Our built-in fan is re-circulating the air volume by sucking the room air from the bottom and top inside the unit where the whole treatment process will start.
– Pre-filter which captures larger particulates
– Carbon filter absorbs a wide range of odors and volatile organic compounds (VOCs)
2” True High-Efficiency Particulate Air (HEPA) filter with Antimicrobial treatment captures 99.9% of airborne particulates as small as 0.3 microns, including viruses, bacteria, mold spores, dust mites, and other allergens.
Clean air is the final product released into the room!
OdorBlaster units were designed to remove unpleasant odors and to refresh moldy air in closed areas by using our advanced UV technology process to disinfect and clean air. Our OdorBlaster units are cleaning 3000 times better than any Chlorine-based product and 10 times more efficient than most disinfectants; using the only complete sterilizing agent at ambient temperature – ozone. This also eliminates the bacteria which cause odors. Fruits & vegetables carry bacteria and mold directly from farms which reduces shelf life and can cause health issues. Ozone is a more effective biocide than other substances due to its high reactivity and its strong oxidant power. OdorBlaster eliminates microorganisms / microbial pathogens, both airborne and on the surface.
Our OdorBlaster units are designed to safely generate ozone at pre-set levels, with very accurate computerized controls. This is ensured using tested and calibrated safety sensors, which continuously detect & monitor ozone levels. The unit operation can be set to meet different pollution levels and parameters, automatically optimizing its performance. All the operations are performed through HMI with a touch screen.
Our OdorBlaster units are designed to keep the area and its contents sanitized – be it a vegetable, fruits or meat storage, dining hall or kitchen, garbage rooms or wash rooms, or a waste handling facility. Higher air volumes and air changes can be easily achieved by adding more slave units to the master unit. This flexibility unique to Hurricane system enables OdorBlaster to handle any large areas.
OdorBlater removes the odor / bacteria / molds and many other pollutants at source itself, by using our technology to generate ozone in controlled manner, photo-chemically from UV light, to make the surroundings healthier for all.